With the pillowcases safely put to bed 😉 I commenced my next project – a tie. I followed a tutorial from the same vlog where I found the pillowcase tutorial, MADE Everyday. Here is the link: https://www.youtube.com/watch?v=m3obNOWc4Kc&t=323s The tutorial was easy to follow, however this was a bit of a trickier project from the outset because I did not have a pattern for a tie. I had to ask my fiancé for a tie he no longer liked and then proceeded to cut it apart. It was a win-win situation: I got to use the tie as a makeshift template and he got a much nicer, handmade tie as a replacement.
Using the tie as a template (bearing in mind that I had deconstructed a previously made tie, therefore would need to add point to the fabric, make the shape much neater, allow for seam allowances, etc) I proceeded to cut out the fabric I needed. I then pinned the fabric I had cut to the lining and used it to get an exact copy of the shapes for the front and back of the tie.
One of the hardest parts (aside from the faff of cutting out the shapes for the tie without the use of a pattern, coupled with my shoddy cutting skills) was pinning together the front and back of the tie and sewing them together, in order to make one long, continuous length of fabric. There was a 1/4″ seam allowance and I had to get the edges together perfectly. Needless to say, unpicked my first try!
I carefully followed the instructions of the tutorial and was very happy with the finished results. Unfortunately, I made the loop on the tie too small, so it could not be used to hold the back of the tie in place. Lucky for me, my fiancé informed me that he does not bother to use the loops anyway (RESULT). I had also placed the loop too far up the tie, which meant that had it been big enough to use, it would have been impossible to do so. Shortly after taking the photograph, I cut the loop off – problem solved!
Happy with the overall result from the first tie, I made a second tie (it turned into a skinny tie but mainly due to me making a mistake and refusing to unpick the entire length of the tie). Much like during the pillowcase project, my mistakes came thick and fast when I started making the second tie. I tried to complete the project with minimal assistance from the video (will I ever learn?!) and soon my best friend came out once again (the seam unpicker). Sigh….I HAVE learned my lesson since and I will follow tutorials, instructions and guidance relentlessly until they are firmly ingrained in my mind. Only then shall I try to sew from memory. I am blessed with the ability to somehow rectify any mistakes I make, regardless of how catastrophic, and still end up with a project that I can be proud of. I hope that this gift follows me throughout my sewing career. It is one that I am very happy to have.
The second tie turned out great and is a skinny tie to add to my fiancé’s collection. The first tie certainly got his seal of approval, as he proudly wore it to work at the beginning of this week. What a sweetheart! He made me a very happy lady that day. 😀 I must say that the other difficulty I had with the tie was turning it right-side out once completed. On the tutorial, the vlogger successfully attaches a safety pin to one end of the tie, turns the fabric on itself and pushes/threads the fabric and safety pin along the entire length of the tie. I tried that method and failed miserably. I was also concerned about potentially ruining the fabric by using this method, so opted for a long-winded method that was much more time-consuming but worked for me. Horses for courses – I got the job done in the end. I would use this tutorial again to make other ties, which I intend to do very soon as my mum has requested one as a birthday gift for a relative. Another project all tied up. Next on my to do list is a zipper pouch.